Tips To Select The Materials For Standing Seam Cladding

The standing seam cladding is a cladding system that is chiefly used for conventional cladding. Usually, the choice of using a system is primarily driven by the architecture requirements of the construction project. The primary goal of using standing seam cladding is to attain the longer length or to attain correlation between the façade and the covering of the roof. However, while opting for a standing seam cladding system apart from the overall look of the project; there are other aspects that one should consider like the width of the panel, the suitability of the, etc.

Things To Consider While Selecting Materials For Standing Seam Cladding:

Standing Seam Cladding

There are some key points that need to be considered while standing seam cladding. By clear thinking, one should look at the points below. These points will help in making the specification and decisions easier.

Consider the Widths of the Panel and the Overall Impact of the Desired Facade Style:

• It is very important to understand if narrow pan widths or wide widths will be preferred for the project. It is equally important to understand the best fit across the coil material and the fit across the wall.

• Also,  take note if the waste will be minimized and the material costs should be kept low. In addition, consider looking at the uniform random patterns or the combination of different types of facades.

Identify the fascinating Shadow Lines:

• As an initial step deciding the required style is an important aspect before opting for the standing seam cladding. Once the style is decided, it is important to decide if the buyer likes hairline, recessed express or seamed profiles.

• Once the suitable shadow line is selected, it is very important to consider how deep, high, or wide should join be. It is also important to understand the load requirements before proceeding with the choice of the materials.

Analyze About The Preferred Roofing:

Steel roofing:

Standing Seam Cladding

Some of the metal roofing is called steel roofing if it is made out of several materials including alloys. Most of the roofing is made out of steel that is heavy and sturdy when compared to aluminum. The steel gauge affects the overall performance and durability of the roofing. There are two common gauges of the roof that have G-60 and G-90. The latter is less economical and usually used for ribbed roof panels and low-end corrugated panels. Steel seam cladding made out of aluminum is long lasting.

Copper metal roofing:

The biggest advantage is that copper can be easily recycled. This roofing material is that it won’t rust and does not have a proper finish. It can be easily tooled and can withstand natural weathers. Overall standing seam cladding made out of copper lasts longer when compared to the other kinds of materials. However, copper is that is very expensive. This is the reason why copper is used to covering a bay window or cupola instead of the entire roof. The customer should expect to pay close to $1,800 per square for material and labor in order to get the copper coating done.

All the tips mentioned above is a combination of the best practices and materials that can be used for standing seam cladding. Every day a construction specialist or an individual go about selecting the right kind of standing seam cladding material and these tips help a great deal in selecting the material. While you decide to opt for standing seam cladding it is advisable to do a small research on it. In addition, always discuss with a specialist or you can also visit your nearby cladding material sell store.